Atomic Aquatics Split Fins

$285.95$337.95

Clear

Description

Atomic Aquatics Split Fins

For those Divers who believe in SplitFins, we have the Atomic Aquatics Split Fins in Open Heel Design for Scuba Diving.

All it took was watching the tail fins of
fish – except that we couldn’t
keep up with them because our traditional fins took too much effort. Using hard
kicking paddle fins can result in leg strain, fatigue and cramping. Because of
the kick resistance of a paddle fin, divers often “felt” like they
were moving fast. But underwater speedometers proved that these divers were
actually moving relatively slow. SplitFins deliver more propulsion with less
drag and
kick with less effort. Reducing the stress and strain of the kick results in
greater sustained speed, power and comfort. Independent testing has also confirmed
that the SplitFin design significantly reduces air consumption.

Not all SplitFins are the same.
Splitfins come in a variety of shapes, sizes and stiffness. These contribute
greatly to overall comfort and performance. A fin with short, soft blades will
kick easier than a longer, stiffer one, but will require many more kicks to
travel the same distance. A blade that is too stiff will require too much effort
to kick comfortably. The Atomic SplitFins were specifically designed to optimize
all these variables. They are easy kicking fins that deliver high thrust, speed,
and efficiency with a comfortable, low frequency kick cycle.

How To Swim With Atomic SplitFins

How To Swim With Atomic SplitFins

Don’t
worry about how easy the SplitFins are to kick. There is nothing
wrong, you’re probably already going just as fast as
you did with your old fins. Although they work with a variety
of kicking styles, you should adapt to a smaller range, more
frequent flutter kick for maximum performance.

The smaller-range rapid flutter kick also
keeps your legs within the slipstream of your body so that you
punch a hole in the water that is only as big as your shoulders
and your tank. Remember, less drag means more speed and less
effort.

Features

Why Multi-Composite Plastics?

Extensive R&D and testing yielded the perfect formula of flexibility and
rigidity for efficient propulsion. Atomic multi-composite plastics result in
a powerful kick that requires less effort, stress and strain…meaning less air
consumption.

Traditional paddle fins work by pushing water rearward. As a paddle fin is
pushed through the water, much of the water spills over the top surface of
the blade and sticks to it, creating drag. Extra kicking effort is required
to overcome that drag. The Atomic SplitFin slices through the water with two
wing-shaped surfaces, creating lift and forward propulsion more like a propeller.
Any water traveling over the top of the blade is funneled into and out of the
opening (split) between the wings. Drag is reduced, effort is reduced, and
efficiency is increased.

Propeller-Fin™ Technology
Moves You Faster

Atomic Aquatics SplitFins use Propeller-Fin Technology to deliver ultra-high
speeds with a small-range rapid flutter kick. This works in the same manner
that increasing the RPM on a boat propeller accelerates a boat to high speeds.

Multi-Composite Plastics
And Other Uniquely Atomic Features

The Atomic signature is our use of exotic materials specifically designed to
improve performance. We developed multi-composite plastics for the SplitFins
to maximize the efficiency of the kick with less fatigue. Flexible side rails
and a stiff foot pocket are combined with stiff battens in the blade to control
the flex pattern for optimum performance. Our patented EZ-LOK Buckle System
is one of those distinct Atomic features that make divers love us even more.

Sizes

SplitFin Sizes

SplitFin Sizing (Full
Foot)
SplitFin Sizing (Open
Heel)


Men’s USA EU Men’s USA EU


4 1/2 – 5 1/2 37-38 Small 5 1/2 37-38


6 – 7 39-40 Medium 6 – 8 1/2 39-41


7 1/2 – 8 1/2 40-41 Large 9 – 11 42-43


9 – 10 42-43 XLarge 11 1/2 – 13 44-46

10 1/2 – 11 1/2 43-44

12 – 14 45-46

 

Spring Heel Straps

Another “rethinking” of something simple, the unique
rust-resistant stainless steel springs were designed with variable pitch
geometry. Divers get a more comfortable
fit and easy one-hand removal, yet the springs are resistant to deformation
if overstretched. Included on the “Smoke on the Water” Splitfin
and available for all Atomic SplitFins or as a universal retrofit for other
brands.

The Universal Spring Straps share the same features
found on Atomic Springs, but are made to fit almost any other brand of open
heel fins. Available
in medium and long.

We do weekly orders with Atomic Aquatics. While we stock some colours and sizes we do not carry the entire split range in stock. Please call for availability. If we are out of stock we would have the order in 7-10 days typically.

Buy Atomic Split Fins Online in Canada with Free Shipping from Dan’s Dive Shop, a Top Stocking Atomic Aquatics Dealer.

Additional information

Weight 3 kg
Dimensions 22 × 22 × 79 cm
Size

Extra Large, Large, Medium, Small

Colour

Black, Blue, Pink, Purple, Red, Shark Silver, Smoke on the Water with Spring Heel Strap, Teal / Aqua, Yellow

Reviews

There are no reviews yet.

Be the first to review “Atomic Aquatics Split Fins”

Your email address will not be published. Required fields are marked *